Reply -
Raw
C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/bin/avrdude.exe -CC:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf -v -patmega328pb -cstk500v1 -PCOM3 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xF5:m -Uhfuse:w:0xDC:m -Ulfuse:w:0xE2:m
avrdude.exe: Version 6.3, compiled on Feb 17 2016 at 09:25:53
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf"
Using Port : COM3
Using Programmer : stk500v1
Overriding Baud Rate : 19200
AVR Part : ATmega328PB
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : STK500
Description : Atmel STK500 Version 1.x firmware
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.05s
avrdude.exe: Device signature = 0x1e9516 (probably m328pb)
avrdude.exe: erasing chip
avrdude.exe: reading input file "0x3F"
avrdude.exe: writing lock (1 bytes):
Writing | ################################################## | 100% 0.02s
avrdude.exe: 1 bytes of lock written
avrdude.exe: verifying lock memory against 0x3F:
avrdude.exe: load data lock data from input file 0x3F:
avrdude.exe: input file 0x3F contains 1 bytes
avrdude.exe: reading on-chip lock data:
Reading | ################################################## | 100% 0.02s
avrdude.exe: verifying ...
avrdude.exe: 1 bytes of lock verified
avrdude.exe: reading input file "0xF5"
avrdude.exe: writing efuse (1 bytes):
Writing | ################################################## | 100% 0.02s
avrdude.exe: 1 bytes of efuse written
avrdude.exe: verifying efuse memory against 0xF5:
avrdude.exe: load data efuse data from input file 0xF5:
avrdude.exe: input file 0xF5 contains 1 bytes
avrdude.exe: reading on-chip efuse data:
Reading | ################################################## | 100% 0.02s
avrdude.exe: verifying ...
avrdude.exe: 1 bytes of efuse verified
avrdude.exe: reading input file "0xDC"
avrdude.exe: writing hfuse (1 bytes):
Writing | ################################################## | 100% 0.02s
avrdude.exe: 1 bytes of hfuse written
avrdude.exe: verifying hfuse memory against 0xDC:
avrdude.exe: load data hfuse data from input file 0xDC:
avrdude.exe: input file 0xDC contains 1 bytes
avrdude.exe: reading on-chip hfuse data:
Reading | ################################################## | 100% 0.02s
avrdude.exe: verifying ...
avrdude.exe: 1 bytes of hfuse verified
avrdude.exe: reading input file "0xE2"
avrdude.exe: writing lfuse (1 bytes):
Writing | ################################################## | 100% 0.02s
avrdude.exe: 1 bytes of lfuse written
avrdude.exe: verifying lfuse memory against 0xE2:
avrdude.exe: load data lfuse data from input file 0xE2:
avrdude.exe: input file 0xE2 contains 1 bytes
avrdude.exe: reading on-chip lfuse data:
Reading | ################################################## | 100% 0.02s
avrdude.exe: verifying ...
avrdude.exe: 1 bytes of lfuse verified
avrdude.exe done. Thank you.
C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/bin/avrdude.exe -CC:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf -v -patmega328pb -cstk500v1 -PCOM3 -b19200 -Uflash:w:C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex:i -Ulock:w:0xCF:m
avrdude.exe: Version 6.3, compiled on Feb 17 2016 at 09:25:53
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf"
Using Port : COM3
Using Programmer : stk500v1
Overriding Baud Rate : 19200
AVR Part : ATmega328PB
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : STK500
Description : Atmel STK500 Version 1.x firmware
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.04s
avrdude.exe: Device signature = 0x1e9516 (probably m328pb)
avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file "C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex"
avrdude.exe: writing flash (32748 bytes):
Writing | ################################################## | 100% 0.00s
avrdude.exe: 32748 bytes of flash written
avrdude.exe: verifying flash memory against C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex:
avrdude.exe: load data flash data from input file C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex:
avrdude.exe: input file C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex contains 32748 bytes
avrdude.exe: reading on-chip flash data:
Reading | ################################################## | 100% -0.00s
avrdude.exe: verifying ...
avrdude.exe: 32748 bytes of flash verified
avrdude.exe: reading input file "0xCF"
avrdude.exe: writing lock (1 bytes):
Writing | ***failed;
################################################## | 100% 0.13s
avrdude.exe: 1 bytes of lock written
avrdude.exe: verifying lock memory against 0xCF:
avrdude.exe: load data lock data from input file 0xCF:
avrdude.exe: input file 0xCF contains 1 bytes
avrdude.exe: reading on-chip lock data:
Reading | ################################################## | 100% 0.02s
avrdude.exe: verifying ...
avrdude.exe: verification error, first mismatch at byte 0x0000
0x0f != 0xcf
avrdude.exe: verification error; content mismatch
avrdude.exe done. Thank you.
Error while burning bootloader.