+Ethernet eth0: MAC address 00:50:fc:02:03:04
IP: 192.168.12.142
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version v2_0 - bu+Ethernet eth0: MAC address 00:50:fc:02:03:04
IP: 192.168.12.142
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version v2_0 - built 16:13:31, Jun 28 2007
Platform: PC (I386)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.R1
RAM: 0x00000000-0x000f0000, 0x000705f0-0x000a0000 available
Flash ID=22a8,flash_base=0xffc00000
linux -b 0x400000 -l 0x000ecbfc -s 0x001c6cf6 -c "console=ttyS0,38400"
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> IP: 192.168.1.6
RedBoot> memc=32
!!!mem_size: 2000000
kernel length=0x000ecbfc ,ramdisk_size=0x001c6cf6,mem_size=0x00008000
initrd 1e19000 len 1c6cf6
Uncompressing Linux
Done, booting
Linux version 2.6.24.7 (umr@svn) (gcc version 4.1.2) #133 Mon Sep 21 11:57:09 CEST 2009
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000002000000 (usable)
32MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 8192
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 8192
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 02000000:fe000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: console=ttyS0,38400 rootfstype=ext2 root=/dev/ram0
Initializing CPU#0
PID hash table entries: 128 (order: 7, 512 bytes)
console [ttyS0] enabled
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 27864k/32768k available (1652k kernel code, 4516k reserved, 439k data, 148k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffffa000 - 0xfffff000 ( 20 kB)
vmalloc : 0xc2800000 - 0xffff8000 ( 983 MB)
lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
.init : 0xc030e000 - 0xc0333000 ( 148 kB)
.data : 0xc029d06b - 0xc030ae3c ( 439 kB)
.text : 0xc0100000 - 0xc029d06b (1652 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512
Compat vDSO mapped to ffffe000.
CPU: 486
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
net_namespace: 64 bytes
NET: Registered protocol family 16
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
Time: pit clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1819k freed
rdc321x: reg 80000068 was 0x4c99f
rdc321x: reg 80000068 set to 0x4c99f, became 0x4c99f
rdc321x: reg 80000068 was 0x4c99f
rdc321x: reg 80000068 set to 0x6c99f, became 0x6c99f
rdc321x: reg 8000385c was 0x2eee
rdc321x: reg 8000385c set to 0x2eee, became 0x2eee
rdc321x: reg 8000385c was 0x2eee
rdc321x: reg 8000385c set to 0x2e9b, became 0x2e9b
rdc321x: init success
Total HugeTLB memory allocated, 0
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16000K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
flash device: 400000 at ffc00000
Dovado RDC Flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 2 MTD partitions on "Dovado RDC Flash":
0x00000000-0x003f0000 : "linux"
0x003f0000-0x00400000 : "bootldr"
usbmon: debugfs is not available
PCI: Enabling device 0000:00:0a.1 (0000 -> 0002)
ehci_hcd 0000:00:0a.1: EHCI Host Controller
ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0a.1: irq 14, io mem 0xd4900000
ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd 0000:00:0a.0: OHCI Host Controller
ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0a.0: irq 15, io mem 0xd5900000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
gpio-buttons driver version 0.1.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Mirror/redirect action on
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_time loading
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 148k freed
Please be patient, the UMR 2.6 is loading ...
Loading module: crypto_algapi
Loading module: cryptomgr
Loading module: crypto_hash
Loading module: blkcipher
Loading module: cbc
Loading module: ecb
Loading module: deflate
Loading module: aes_generic
Loading module: arc4
Loading module: crc-itu-t
Loading module: eeprom_93cx6
Loading module: \
Loading module: r6040
<6>r6040: RDC R6040 NAPI net driver,version 0.19 (16Jun2008)
r6040: debug 0
eth%d: no parent - using default mac address
<6>r6040: RDC R6040 NAPI net driver,version 0.19 (16Jun2008)
r6040: debug 0
eth%d: no parent - using default mac address
Loading module: leds
leds: module license 'LGPL' taints kernel.
LED & GPIO & LAN Status Driver LED_VERSION
Starting rc
Firmware version 4.0.2.816 official
Sat Jan 1 00:00:00 UTC 2000
Refresing ...
Done refreshing
WEP security
Link Change x9002
The UUID Hex string is:bc329e001dd811b2a98d0016a6107fd6
The UUID ASCII string is:bc329e00-1dd8-11b2-a98d-0016a6107fd6!
WARNING: at arch/x86/kernel/pci-dma_32.c:66 dma_free_coherent()
Pid: 521, comm: ifconfig Tainted: P 2.6.24.7 #133
[<c0106f00>] [<c285aeac>] [<c285b503>] [<c0239c7e>] [<c0239b4c>] [<c0238ae0>] [<c027faa7>] [<c0231a56>] [<c02318e0>] [<c014b565>] [<c014b764>] [<c014b7a7>] [<c0103b42>] [<c0290000>] =======================
WARNING: at arch/x86/kernel/pci-dma_32.c:66 dma_free_coherent()
Pid: 521, comm: ifconfig Tainted: P 2.6.24.7 #133
[<c0106f00>] [<c285aec1>] [<c285b503>] [<c0239c7e>] [<c0239b4c>] [<c0238ae0>] [<c027faa7>] [<c0231a56>] [<c02318e0>] [<c014b565>] [<c014b764>] [<c014b7a7>] [<c0103b42>] [<c0290000>] =======================
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device eth0 entered promiscuous mode
device ra0 entered promiscuous mode
Link Change x1022
The UUID Hex string is:bc329e001dd811b2ae240016a6107fd6
The UUID ASCII string is:bc329e00-1dd8-11b2-ae24-0016a6107fd6!
br0: port 2(ra0) entering learning state
br0: port 1(eth0) entering learning state
Link Change x9022
Loading simple firewall-iptables rules
Warning, File /var/wan/interface not found
External interface is set to ppp0
Reserved ports used by IXP:
4431
Enabling forwarding..
Enabling DynamicAddr..
Clearing any existing rules and setting default policy..
no user port will be open for externel web access
Firewall configuration done\n
End of rc
BusyBox v1.12.1 (2009-08-28 11:45:35 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
Starting profile
profile first run
Sat Jan 1 00:00:00 GMT 2000
profile: Connection tracker is off
usb_hotplug: Starting usb hotplug script
End of profile
# background script started
br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state