C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/bin/avrdude.exe -CC:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf -v -patmega328pb -cstk500v1 -PCOM3 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xF5:m -Uhfuse:w:0xDC:m -Ulfuse:w:0xE2:m avrdude.exe: Version 6.3, compiled on Feb 17 2016 at 09:25:53 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf" Using Port : COM3 Using Programmer : stk500v1 Overriding Baud Rate : 19200 AVR Part : ATmega328PB Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC2 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : STK500 Description : Atmel STK500 Version 1.x firmware Hardware Version: 2 Firmware Version: 1.18 Topcard : Unknown Vtarget : 0.0 V Varef : 0.0 V Oscillator : Off SCK period : 0.1 us avrdude.exe: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.05s avrdude.exe: Device signature = 0x1e9516 (probably m328pb) avrdude.exe: erasing chip avrdude.exe: reading input file "0x3F" avrdude.exe: writing lock (1 bytes): Writing | ################################################## | 100% 0.02s avrdude.exe: 1 bytes of lock written avrdude.exe: verifying lock memory against 0x3F: avrdude.exe: load data lock data from input file 0x3F: avrdude.exe: input file 0x3F contains 1 bytes avrdude.exe: reading on-chip lock data: Reading | ################################################## | 100% 0.02s avrdude.exe: verifying ... avrdude.exe: 1 bytes of lock verified avrdude.exe: reading input file "0xF5" avrdude.exe: writing efuse (1 bytes): Writing | ################################################## | 100% 0.02s avrdude.exe: 1 bytes of efuse written avrdude.exe: verifying efuse memory against 0xF5: avrdude.exe: load data efuse data from input file 0xF5: avrdude.exe: input file 0xF5 contains 1 bytes avrdude.exe: reading on-chip efuse data: Reading | ################################################## | 100% 0.02s avrdude.exe: verifying ... avrdude.exe: 1 bytes of efuse verified avrdude.exe: reading input file "0xDC" avrdude.exe: writing hfuse (1 bytes): Writing | ################################################## | 100% 0.02s avrdude.exe: 1 bytes of hfuse written avrdude.exe: verifying hfuse memory against 0xDC: avrdude.exe: load data hfuse data from input file 0xDC: avrdude.exe: input file 0xDC contains 1 bytes avrdude.exe: reading on-chip hfuse data: Reading | ################################################## | 100% 0.02s avrdude.exe: verifying ... avrdude.exe: 1 bytes of hfuse verified avrdude.exe: reading input file "0xE2" avrdude.exe: writing lfuse (1 bytes): Writing | ################################################## | 100% 0.02s avrdude.exe: 1 bytes of lfuse written avrdude.exe: verifying lfuse memory against 0xE2: avrdude.exe: load data lfuse data from input file 0xE2: avrdude.exe: input file 0xE2 contains 1 bytes avrdude.exe: reading on-chip lfuse data: Reading | ################################################## | 100% 0.02s avrdude.exe: verifying ... avrdude.exe: 1 bytes of lfuse verified avrdude.exe done. Thank you. C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/bin/avrdude.exe -CC:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf -v -patmega328pb -cstk500v1 -PCOM3 -b19200 -Uflash:w:C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex:i -Ulock:w:0xCF:m avrdude.exe: Version 6.3, compiled on Feb 17 2016 at 09:25:53 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\tools\avrdude\6.3.0/etc/avrdude.conf" Using Port : COM3 Using Programmer : stk500v1 Overriding Baud Rate : 19200 AVR Part : ATmega328PB Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC2 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : STK500 Description : Atmel STK500 Version 1.x firmware Hardware Version: 2 Firmware Version: 1.18 Topcard : Unknown Vtarget : 0.0 V Varef : 0.0 V Oscillator : Off SCK period : 0.1 us avrdude.exe: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.04s avrdude.exe: Device signature = 0x1e9516 (probably m328pb) avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude.exe: erasing chip avrdude.exe: reading input file "C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex" avrdude.exe: writing flash (32748 bytes): Writing | ################################################## | 100% 0.00s avrdude.exe: 32748 bytes of flash written avrdude.exe: verifying flash memory against C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex: avrdude.exe: load data flash data from input file C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex: avrdude.exe: input file C:\Users\Odd\AppData\Local\Arduino15\packages\m328pb\hardware\avr\1.0.1/bootloaders/optiboot_m328pb.hex contains 32748 bytes avrdude.exe: reading on-chip flash data: Reading | ################################################## | 100% -0.00s avrdude.exe: verifying ... avrdude.exe: 32748 bytes of flash verified avrdude.exe: reading input file "0xCF" avrdude.exe: writing lock (1 bytes): Writing | ***failed; ################################################## | 100% 0.13s avrdude.exe: 1 bytes of lock written avrdude.exe: verifying lock memory against 0xCF: avrdude.exe: load data lock data from input file 0xCF: avrdude.exe: input file 0xCF contains 1 bytes avrdude.exe: reading on-chip lock data: Reading | ################################################## | 100% 0.02s avrdude.exe: verifying ... avrdude.exe: verification error, first mismatch at byte 0x0000 0x0f != 0xcf avrdude.exe: verification error; content mismatch avrdude.exe done. Thank you. Error while burning bootloader.